Buyers BH10 Series Uživatelský manuál stáhnout pdf

Quality since 1946

9049 Tyler Blvd. • Mentor, Ohio 44060

Phone (440) 974-8888 • Fax (440) 974-0165

Toll-Free Fax 800-841-8003 • buyersproducts.com

Installation Instructions

BH10-Series Combination Hitch

—continued on other side

Hitch Capacity

4,000 lbs. Max. Vertical Load

20,000 lbs. Max. Trailer Weight

WARNING:

Maintain adequate vertical (tongue) load to properly

control the trailer (generally 10%), but do not exceed

the above rated capacities.

4. To close latch, pull plunger, rotate latch

closed and release plunger. Plunger must be fully

engaged to lock the latch. Assembly safety pin.

Operating Instructions for Ball Hitch

1. Before operating, inspect for proper opera-

tion, worn, damaged or missing parts and secure

mounting. Correct as required before use.

2. Open latch by removing safety pin, pulling

plunger and rotating latch open.

3. Replace safety pin in hole to retain latch in

open position.

4. Position ball coupler over the proper size ball

and lock into place, following the instructions of

the coupler manufacturer.

WARNING:

Other steps and inspections are also required. Consult

D.O.T. regulations and American Trucking Association for

complete coupling and uncoupling procedures.

Towing Applications

Trailers and equipment designed for over-the-road

towing within the stated capacities. For off-road

applications, reduce the capacities listed above

by 25% and use in conjunction with a swivel-type

drawbar. This pintle hook/ball hitch is well suited

for use in the utility and construction industries.

Drawbar Eye/Ball Hitch Dimensions

2-3/8" – 3" I.D. with 1-1/4" – 1-9/16" diameter section

2" or 2-5/16" SAE J 684 Ball Hitch Coupler.

Mounting

1. Use a mounting structure of sufficient strength

to support the rated capacity of the pintle hook in

accordance with SAE J849b.

2. Use the hole pattern template supplied with

the pintle hook.

3. Use four 9/16" grade 8 bolts, torque to 120 ft-lbs.

Operating Instructions for Pintle Hook

1. Before operating, inspect for proper opera-

tion, worn, damaged or missing parts and secure

mounting. Correct as required before use.

2. Open latch by removing safety pin, pulling

plunger and rotating latch open.

3. Position drawbar eye over the horn of the

pintle and lower into place.

WARNING:

Do not damage the latch. Be particularly careful with the

drawbar when coupling and uncoupling.

1 2

Shrnutí obsahu

Strany 1 - Installation Instructions

Quality since 19469049 Tyler Blvd. • Mentor, Ohio 44060Phone (440) 974-8888 • Fax (440) 974-0165Toll-Free Fax 800-841-8003 • buyersproducts.comInstall

Strany 2 - Ball Replacement

Quality since 19469049 Tyler Blvd. • Mentor, Ohio 44060Phone (440) 974-8888 • Fax (440) 974-0165Toll-Free Fax 800-841-8003 • buyersproducts.comBH10INS

Komentáře k této Příručce

Žádné komentáře

Buyers BH10 Series Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Pro auto Buyers BH10 Series. Buyers BH10 Series User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Pro auto Buyers BH10 Series